Site icon Techies Post

How to Fix Epson Printer in Error State?

Epson Printer

Today’s topic deals with the issue of the Epson printer not printing properly. So, here are the steps when your Epson printer is not printing black:

Follow the steps below to clean the printer rollers.

Call 1800 425 00 11 Toll-free

Epson Printer not Printing Black Ink

It is a very common thing that might be your printer doesn’t give you black print. IT may be due to technical glitches with the printer.

Cause of error when Epson printer does not print correctly:

The printer device does not support without a driver so it must be sure that you have installed a driver and it is working excellent. when it comes to the driver installation and download process, it is the most important task to follow accurately and for that, you need to check out the command that helps to check that your printer driver is suitable or not. So driver installation might be a chief cause in the view of fixing this error

Some Important Points To Stick if Epson printer is not printing black:

2. Check the volume of ink available in the cartridge.

Even after following the above authentic steps, you unable to fix the issue. In that case, you may check on the printhead of the printer to overcome the difficulty of Epson printer not printing black ink

3. Track Down Your Printhead:

If you found that the switching cartridge is not working, the next step you should perform is to check your printhead.

Steps to follow if the Epson printer is not printing even after changing the cartridge:

Remove Protective Tape

Most ink cartridges ship with a small strip of protective tape covering the print nozzle. This tape blocks the nozzle to prevent ink from leaking out during storage or shipping. If you don’t remove the tape, the cartridge won’t be able to print. Remove the cartridge from the printer and look for the tape. These seal the cartridge so the ink doesn’t dry out. If you remove the label, the ink can dry out rapidly.

Reset Ink Cartridge Counter

Your printer may not recognize the new ink cartridge, or the ink counter may read it as empty. Many printers have a cartridge reset feature that forces the machine to recognize the cartridge as new. For example, to reset the cartridge in some Epson Stylus models, press and hold the “Cleaning” button or the “Load/Eject” button for three seconds. Lift the clamp securing the cartridge, but don’t remove the cartridge from the printer. Shut the clamp and press “Load/Eject” again.

Run Extended Cleaning Cycle

If your ink cartridge sat in storage for any length of time, the ink may have started to dry out. Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. Check your printer for a “Cleaning” button and press it or hold it down for a few seconds. Read the printer’s manual to find out how to run a cleaning cycle on your machine. After running the cleaning cycle, print a test page to determine whether the printer can print again.

Refilled Cartridge Problems

Fix this problem by removing the cartridge and injecting more ink into the sponge through the exit hole. Air bubbles also can get trapped inside the cartridge, blocking ink flow. Allow the cartridge to sit unused for about an hour to give the bubble a chance to dislodge by itself. If the problem persists, remove the cartridge and gently tap it on a table to dislodge the bubble.

To fix your Epson printer not printing issue

The following are a few fixes that have helped many Epson printer users fix their issues.

  1. Check your printer connection
  2. Set your printer as default printer
  3. Update your printer driver
  4. Check the Print Spooler service
  5. Clear all print jobs
  6. Use another program to print your document
  7. Check the status of your printer

So, these were the fixes regarding the Epson printer not printing black, not printing even after changing the cartridge. And even the solution for printer not printing properly.

Exit mobile version