AirPods are Apple’s Bluetooth wireless earbuds that include a unique, Apple-developed chip, the H1 (AirPods 2) or W1 (AirPods 1). That helps optimize battery use, enhance the Bluetooth connections and improve overall audio connectivity. Here, you will find help for airpods not working.
Computer connection woes
This isn’t much of an issue with newer Macs, but sometimes maintaining a Bluetooth connection can be problematic with older machines. The first thing to try is the same as the first step when trying to connect to a phone: Put the AirPods back into their case for 10 seconds before putting them back in your ears.
If that doesn’t work, you will want to unpair and pair them again, which can be done by turning Bluetooth on and off, but this could be a problem if you use a Bluetooth mouse on your computer. In this case, head to your Bluetooth settings (locate the Bluetooth icon in your status bar, or find the setting under System Preferences > Bluetooth), find the AirPods and disconnect them. Then go through the same steps you used to pair the AirPods to your computer in the first place.
Audio issues or static
Unlike some of the other problems described in this article, static and/or subpar audio quality can be caused by a lot of things, so it’s much tougher to diagnose. Bluetooth connections can be affected by interference, which can cause everything from static to reduced audio quality and even disconnects. If this always happens in one place, interference could be the problem. If this is happening in your home, you might be able to track down the device causing interference and move it or use your AirPods in a different area
Android volume trouble
If you use your AirPods with an Android device, you might have run into a problem in which the volume is much lower than with iOS devices. A lot of features of the AirPods use the W1 chip — and H1 on the AirPods 2 and AirPods Pro — to interact with your iPhone or iPad, but Android devices don’t get this luxury, and volume control can be affected by this.
The heart of the issue is that when you’re dealing with most Bluetooth audio devices, there are two volume levels: The volume of your source device (phone, tablet, or computer), and the volume of your audio device. When using the AirPods with an Android source device, the volume of the AirPods isn’t automatically controlled as it is on iOS.
For a stock Android device, tap the volume either up or down and you should see the volume control appear on the screen. Tap the down arrow next to the volume control, and you’ll see all the available volume sliders appear. One of these should be Bluetooth. Now just turn this one up or down as needed.
How to reset your AirPods
As noted above, completely resetting your AirPods to fix airpods not working issue. The good news is it won’t even take you a minute to do. Here’s how:
- Put your AirPods back in the charging case.
- Hold the button on the back of the case for roughly 15 seconds until the orange LED flashes.
- Open the case next to your phone and wait for the AirPods to reconnect.
Assuming you’re using an iPhone, iCloud will sync the connection to your other devices at this point. If you’re using another device, you will have to pair manually as you would with any other Bluetooth device.
Reasons behind error in working of airpods:
There are a few reasons why your AirPods aren’t going to work. Your AirPods run on a W1 chip and if this isn’t working, you’re going to have problems with the earphones themselves.
- The W1 chip is the new chip on the AirPods that controls their battery, sound, and allows it to connect to other devices. If this is broken, the rest of your AirPods aren’t going to work.
- Connect to other devices. If this is broken, the rest of your AirPods aren’t going to work.
- The next reason why your AirPods aren’t going to work is that there’s a software glitch. A software glitch is a short failure in the software that causes unexpected results for the AirPods.
This can cause the sound not to work for a short period of time which may be something you’re experiencing. The last reason your AirPods aren’t going to work is that they aren’t connected to your devices properly. If the Bluetooth connection isn’t there or it’s very weak, you’re going to experience issues with the AirPods. You can read all the possible solutions down below to fix the issues.
Connect the AirPods to the Device Properly
As I said earlier, one of the reasons why your AirPods aren’t going to work is that the connection between the AirPods and the music source is not apparent. Your earphones require a wireless connection to work because they don’t have any wires.
If you’re using your iPhone or iPad to connect to your AirPods, the connection is very simple and you can follow the steps below to do it. If you’re connecting your AirPods to your Mac, you can read the steps below that.
To connect AirPods to iPhone:
- Get your AirPods charging case and open it
- Tap on Connect on your iPhone or iPad
- Press and hold the pairing button on the back of the case
To Connect AirPods to Mac:
- Click on System Preferences in the Apple menu
- Click on Bluetooth
- Wait for Bluetooth to turn on
- Get your AirPods charging case and open the lid
- Press and hold the setup button on the back of the case
- Do this until the light flashes white
- Choose your AirPods and click Connect
Charge the AirPods Charging Case
If left AirPod is still not working, then you must charge the case first and after the case charged to 100% put the left AirPod in the case and give some time to get a Charge.
in more, make sure your iPhone iOS is up to date, now iOS 13 is the latest firmware.
Unpair and Re-pair the AirPods
Most of the time, by un-pairing and Re-pairing the left AirPod stopped working get fixed. There is no harm in doing this, to do so,
- Go to the “Settings” app.
- Tap “Bluetooth”.
- Next to the AirPods, tap on (i).
- Choose “Forget This Device”.
Now your AirPods are unpaired with your iPhone. Restart the iPhone and again pair the AirPods. The pairing process is different so look at it,
- Place both Apple AirPods in your Charging Case.
- Now Close the lid, wait 30 seconds, then open it.
- Press and hold the setup button for a few seconds, until you see the status light flashing White.
- A white light indicates the AirPods are ready to pair.
- Next, go in the “Bluetooth” settings of the iPhone and tap on AirPods to pair.
If your AirPods weren’t experiencing connectivity issues, the next thing you need to do is to reset the AirPods to fix airpods not working. A factory reset is going to wipe the AirPods and it’s also going to wipe any issues that come with it.
Factory reset means that it’s going to be taken back to the same condition that it was in in the factory, meaning that the AirPods are going to be fully wiped. When your AirPods are fully wiped, you can easily tell if the problem is a bug in the software and not anything permanent like a damaged chip.
To reset the AirPods:
- Press and hold the setup button on the Charging Case
- Let go if the setup button when the status light flashes orange, then flashes white
- The AirPods are now reset to factory status
After you’ve reset your AirPods, you can try the steps above to connect them to another device. Once they connect, you can test out the AirPods and check if they work. If they didn’t work, go to the network resetting.
Apple wireless AIRPODS not working with Windows 10 or Windows 7 PC
According to Bluetooth technology built-in in Airpods, it does work with Microsoft Windows devices and tablets as well as smartphones too.
For this, first of all, you must have Bluetooth on your PC, on Laptop your Bluetooth must enable so that it can easy to discover nearby Bluetooth devices. For Example, Apple Airpods.
My father was trying to connect Bluetooth with his Windows 10 laptop. But his laptop was unable to find my Airpods or airpods not working. Even Bluetooth toggle was set in turn ON Mode.
That’s why I had handled his Airpods not working on windows Laptop Error and ultimately fix by the following troubleshooting.
- Turn Off Bluetooth on Windows Laptop and turn the toggle on Airplane mode
- Wait for 15 seconds and turn Airplane mode OFF, after that switch on Bluetooth.
- Now Reset Apple Airpods by pressing and holding on the Back button of the Airpods charging case and luckily connected with dad’s Windows laptop.