Fix Hp Printer Problem with Printhead?

Fix Hp Printer Problem with Printhead?

HP printers are essential for both domestic as well as commercial use. You can print or easily copy with these high-performance printers. However, if you wish you can experience some annoying problems with these printers. Many times, you can face an hp printer problem with the printhead. Once this happens, you may not be able to print on all. Besides, you can get an error message in the printer control panel saying that the printhead is being unavailable or damaged. HP printer problems with printhead may be due to many issues. However, if you eliminate this issue effectively you will be able to follow some of the tried and tested procedures.

Fix Hp Printer Problem with Printhead?
Fix Hp Printer Problem with Printhead?

Steps to Solve the Hp Printer Problem with the Printhead

Below are some of the measures that you can apply in order to troubleshoot the hp printer problem with the printhead. You will need to apply these procedures to prevent further damage.

Also Read: How to Setup Wireless Printer

Must Read: How to Install HP Wireless Printer?

Also Read: Touchpad Not Working Windows 10

Step1

To troubleshoot the order problem, you can start by removing the clean head and then installing again by the printhead. To do this, you must first turn on the printer and open the cartridge access door. After removing the cartridge and keeping them on a piece of paper, you need to lift the latch handle. After that, you have to remove the printhead and proceed to clean it further. You need to keep in mind that you will have to clean the plastic ramps, edges, and electrical contacts of the ink nozzles.

Hp Printer Problem with the Printhead

For cleaning the printhead, you will need a clean and foam-free cloth or paper and distilled water. After reducing the cloth, you can clean the electrical contact part completely. Then, do not forget to clean the clean areas with dry and unfriendly cloth. You need to clean it after you install the printhead and insert the cartridge. Finally, you will need to close the door to access the cartridge to complete this process.

Step 2

As an alternative solution, you can reset your HP printer. To do this, you will have to turn on the printer and then disconnect the power cord from the HP printer. After unplugging the power cord from the wall outlet, you are about to wait for 60 seconds. After that, you can plug the power cord once again in the wall outlet.

In the next step, you can connect the power cord for the HP printer to proceed with the steps. In case it is not automatically turned on, you have to manually turn it on. This process is going to reset the HP printer. Once you do this, you need to check whether the hp printer problem with printhead is resolved.

Step 3

Another way to solve the HP printer problem with printhead is to change the printhead altogether. Before you remove the cartridge, you will have to wait until you get access to a new printhead assembly. Also, you should not leave the cartridge out for more than 30 minutes. If you do not do this, you can cause the printer to damage the cartridge as well.

Need Assistance? Contact today!

If you are amazed by the Hp printer problem with the printhead, you can get in touch with the professionals in HP printer support. They are skilled to be able to solve printhead issues. In addition, they have years of experience in dealing with issues related to HP printers. You are looking for reliable services, you are in the right place. Therefore, you can contact our professionals strongly if you are stuck with such technical problems.

News Reporter

Leave a Reply

Your email address will not be published. Required fields are marked *